The temperature sensor properties (Config) panel gives you control over sensor settings such as:
• sensor name
• high and low temperature event thresholds
• power saving behavior
To display the temperature sensor properties panel, click on the Config icon (located at the right of each sensor entry in the Device Overview device list).
You can use the temperature sensor properties panel to change one or more settings for a specific sensor or revert to default settings. Changed sensor settings
will take effect after you click the OK button. To close the temperature sensor properties panel without making changes, click on the CANCEL button. To return all
settings to default values, click on the DEFAULT button.
Temperature Sensor Properties buttons and controls:
SENSOR NAME
• Enter a name for the selected temperature sensor (up to 30 characters). The sensor name will be used to identify the selected sensor in the Device