The Temperature Sensor works by monitoring temperature changes within a range of 14°F to 104°F (using the built-in sensor element) and transmitting the current

temperature to your Wireless System Controller. You can set the Motorola homesight Software system to notify you when the temperature falls outside your

preferred range. A nursery, greenhouse, computer room, bedroom, and/or wine cellar are just a few suggested places where you can use your Temperature Sensor

to monitor ambient temperature.

External Temperature Probe

The Temperature Sensor comes with an optional External Temperature Probe, which can extend the temperature sensitivity range to between -40°F and 140°F.

The external probe is immersible, so it may be used to monitor the temperature of both air and water. A pool, aquarium, deep freezer, and/or baseboard radiator

are just a few suggested places where you can use your External Temperature Probe to monitor both ambient and water temperature. The cylindrical metal cap

located at one end of the probe houses the external temperature sensor. The plug (located at the opposite end of the probe) must be inserted completely into the

external probe jack (located on the bottom of the Temperature Sensor). When the External Temperature Probe is connected to the Temperature Sensor, the

internal sensor element is disabled.

107

Motorola homesight™ USER GUIDE

Table of Contents