Extend the range of your Motorola homesight Software system to encompass your entire home or yard. The Wireless Repeater extends the usable communication

range of most other sensors and control devices connected to your Motorola homesight Software system.

Discovery

The discovery button is accessible through a labeled hole on the rear side of the repeater. Start discovery mode from the software. Then, using the included

discovery tool, insert it into the discovery hole and press the button for 1-2 seconds to register the device with your system. The discovery page will indicate that

the device was added successfully. Once the repeater is registered, you can discover far away devices through the repeater by restarting the discovery process.

Repeater Properties

The repeater properties (Config) screen gives you control over device settings such as:

• device name

• mute

• client history

To display the repeater properties screen, click on the Config icon (located at the right of each device entry in the Device Overview device list).

101

Motorola homesight™ USER GUIDE

Table of Contents