Motorola HMEZ2000 User Manual page 106

Power Controller Properties buttons and controls:
NAME
• Enter a name for the selected device (up to 30 characters). The device name will be used to identify the selected device in the Device Overview,
Archives, Event Log, and other screens.
POWER RECOVERY STATE
• On – When the device is plugged into the wall outlet it will start in a 'On' state.
• Off – When the device is plugged into the wall outlet it will start in a 'Off' state.
• Last – When the device is plugged into the wall outlet it will start in last state that is was when power was lost.
TURN OFF AFTER
• If the power controller is currently 'off,' clicking the Control icon will turn it 'on' immediately and then turn off after this setting.
• if the power controller is currently 'on,' clicking the Control icon will turn it off after this setting.
OK
• Changes that have been made to settings are applied to the device. A confirmation (or error) message will pop up. The panel will remain open.
99 Motorola homesight™ USER GUIDE