You can use the repeater properties screen to change one or more settings for a specific device, or revert to default settings. Changed device settings will take
effect after you click the OK button. To close the repeater properties screen without making changes, click on the CANCEL button. To return all settings to default
values, click on the DEFAULT button.
Repeater Properties buttons and controls:
NAME
• Enter a name for the selected repeater (up to 30 characters). The device name will be used to identify the selected device in the Device Overview,
Archives, Event Log, and other screens.
MUTE
• Selecting 'yes' will disable the repeater from repeating communications from devices out of range. 'No' allows repeating communications.
CLIENT HISTORY
• Displays the names of the devices that are being repeated. These devices would normally be out of range if the repeater is disabled.