(such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Welcome Congratulations on your purchase of a Motorola SD4504 series accessory. Take a moment to ensure that your purchase includes each of the items pictured. Product registration (US only) is an important step toward enjoying your new Motorola product. Registering helps us...
Important Safety Instructions Follow these safety precautions when using your cordless phone to reduce the risk of fire, electric shock and injury to persons or property: To reduce the risk of fire and shock: 1. Keep all slits and openings of the phone unblocked.
7. Do not disassemble this product. If service or repair work is required, contact the Motorola address found in the back of this user guide. 8. Do not overload wall outlets and extension cords. 9. Avoid using during an electrical storm. Use a surge protector to protect the equipment.
Installation Guidelines 1. Read and understand all instructions and save them for future reference. 2. Follow all warnings and instructions marked on the product. 3. Do not install this product near a bath tub, sink, or shower. 4. Operate this phone using only the power source that is indicated on the marking label.
8. Use only the power supply that came with this unit. Using other power supplies may damage the unit. 9. Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out.
Getting Started Battery Safety Instructions • Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury. • Caution: There is a risk of explosion if you replace the battery with an incorrect battery type. Use only the battery that came with your phone or an authorized replacement recommended by the manufacturer.
Installing the Batteries 1 Remove any stickers if present. 2 Press on the indentation on the battery door, and slide upwards to remove. 3 Plug connector into the receptacle, and insert the battery into the compartment. (Make sure that the black wire is on the right hand side to ensure proper connection.) 4 Replace the battery door.
Charging the Camera Battery 1 Plug the power cord into the back of the swivel base. 2 Plug the power cord into an electric outlet. Note: The initial battery charging time for your new camera is at least 12 hours. The camera operates using a charged battery or while plug into an outlet.
Setting Up Registering Your Camera You can register up to 8 devices (handsets, cameras, or Cell Dock) to a base unit. To register your new camera: 1 Press and hold the Registration button located beneath the speaker on the camera. 2 Press and hold the PAGE button on base unit.
Deregistering a Device 1 Listen to messages to clear the message waiting LED. 2 Press on the base unit. 3 Press and hold down PAGE on the base unit until the IN USE indicator begins to flash slowly, and then release. 4 Press and hold down PAGE again until the IN USE indicator begins to flash quickly, and then release PAGE.
Placing Your Camera You can place your camera on a flat surface, like a desk or you can use the mounting kit (included) to place your camera on a wall. 1 Cut out the template on the following page and place it against the wall where you wish to mount the camera.
Using Your Camera Monitoring a Room with Your Camera Place your camera in a room that you wish to monitor. If you are using the SD4501 handset, you can hear any activity in the room. The SD4502 handset with color display lets you see and hear activity in the room.
Lighting Tips for Your Camera Your camera has night vision capability. The camera senses light levels and adjusts accordingly. The night vision works only when your camera is plugged into a wall outlet. Night vision images have less and less color as the lighting level is reduced becoming black and white once night vision mode is fully engaged.
Setting Contrast for SD4502 Handset 1 Press Menu. 2 Scroll to and select Display Set Up. 3 Scroll to and select Set Contrast. 4 Adjust the contrast setting by using the scroll keys. 5 Press OK to save changes. Note: The camera should never be pointed directly at the sun or damage may occur.
FCC Information This equipment complies with Parts 15 and 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA.
Note: • This equipment may not be used on coin service provided by the telephone company. • Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. •...
• Inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment.
Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. The FCC requires this product to be serviced only by Motorola or its authorized service agents. CAUTION / WARNING: Changes or modifications not expressly approved by Motorola could void not only the user's authority to operate the equipment, but also the limited warranty.
Industry Canada (IC) Information This equipment meets the applicable Industry Canada (IC) radio and terminal equipment technical specifications. This is confirmed by the certification/registration number found on the label on the bottom of the base unit. The abbreviation IC before the certification/ registration number only signifies that registration was performed based on a Declaration of Conformity and that the Industry Canada technical specifications were met.
The plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the rules and requirements in Industry Canada’s CS-03. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
Repairs Repairs to this equipment should be made by an authorized Canadian maintenance facility designated by Motorola. Any repairs or alterations made by the consumer, or any malfunctions of this equipment, may give the telecommunications company cause to request that you disconnect the equipment, and may void the limited warranty.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Industry Canada’s ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Industry Canada publishes several publications to assist consumers with solving interference problems, which are available from its offices or from its web site (strategis.gc.ca).
This limited warranty is a consumer's exclusive remedy, and applies as follows to new Motorola Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty: Products and Accessories as defined above, unless otherwise provided for below.
(d) Acts of God or nature, or other acts which are not the fault of Motorola, are excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.
This warranty extends to the first end-user purchaser, only. What will Motorola Do? Motorola, at its option, will at no charge repair, or replace any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts.
You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;...
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software.