• Enter a name for the selected motion sensor (up to 30 characters). The sensor name will be used to identify the selected sensor in the Device Overview,

Archives, Event Log, and other screens

QUIET PERIOD BEFORE REARMING

• The quiet period is the length of time (in seconds) after the motion sensor built into this camera is triggered, before the sensor can be triggered again. Click

on the down arrow and select from the list.

POWER MODE

• The sensor can be set to operate in either of two power modes: Normal and Save. In either mode, the sensor features the ability to enter a "sleep mode"

with power-saving circuitry that is designed to extend battery life. In the Save mode, the sensor sleeps for longer periods of time before reporting the

sensor's "health" to the control unit, which can provide up to double the battery lifetime of Normal mode. Note, however that in either mode, the sensor

will immediately wake up and report a status change whenever a change is detected. The default power mode is Normal. Click on the down arrow and

select from the list.

SET

• Changes that have been made to settings are applied to the sensor. A confirmation (or error) message will pop up. The panel will remain open.

Motorola homesight™ USER GUIDE

Table of Contents