`
manually.
Failure to comply could result in serious injury, death or damage to the equipment.
Counter-top Installation
1. Place the unit on a level counter capable of supporting at least 400 pounds ( 180 kg ).
2. Take out the suction pipe assembly and the plastic pipe in the accessories and connect it
with the water inlet on the back of the equipment; take a bottle of drinking water, open and
remove the cap, adjust the plastic positioning plate at the bottom of the suction pipe assembly
to ensure that the water level probe is at least 2 cm higher than the suction pipe; then insert
the bottled water; at the same time, connect the water level control signal wire and fasten the
nut;
Water inlet
-Water suction pipe
-Water level probe
-positioning plate
Fasten the nut
of signal wire
9
© 2019, Cornelius Inc