Cornelius Bubble Installation, Operation & Service Manual page 22

`
Reset number
Reset number
4. Speed setting of peristaltic pump (liquor flow rate setting)
Press the < program > button for the same length to enter the setting mode (take mode 1 as an
example), first enter the zero-clearing mode of the cup number, then press the < program > button
again, and enter the regulating mode of the speed of 1, 2, 3, 4 High Ball drinks, as shown in the figure
below; 1, 2 only need to set one speed, 3, 4 need to set two speeds; press the < move > button to
move the cursor to the right. Under the corresponding reference value of speed, set the value by
pressing the < counting > key, which is the reference value of 000-999. The higher the value, the higher
the speed, and press the < program > key to save and exit for a long time.
18 © 2019, Cornelius Inc