Cornelius Bubble Installation, Operation & Service Manual page 15

`
Remove the spool clockwise
Remove the blockage cap, connect the water pipe to the pagoda head of the water jacket,
power the equipment, press the soda water button, the water from the valve nozzle will enter
the water tank and add to the overflow pipe of the water tank to flow out; then the drainage
pipe will be filled with the blockage cap, put into the bottom of the equipment, install the
dripping tray; take off the water jacket; reload the valve core and the valve nozzle jacket.
CAUTION — Make sure that the power to the unit is disconnected (unplugged) before removing the covers.
CAUTION — Equipment must be installed horizontally.
CAUTION — The equipment should be installed in the use area and be convenient for the
.
maintenance of trained professional maintenance personnel.
4. Installation of alcoholic drinks: The equipment can only be built-in 3 alcoholic drinks,
Remove the water supply
valve sleeve and clip it to
the valve nozzle
11
Draw drain pipe from bottom
of equipment
© 2019, Cornelius Inc