Network Connect - Eth Port - THORLABS TIBERIUS User Manual

®
Tiberius Tunable Femtosecond Ti:Sapphire Laser

5.2.2. Network connect - ETH port

Connect the controller ETH port to a LAN that supports DHCP clients. The network DHCP server will assign an
IP address the Tiberius controller and register the controller's host name "TiberiusXXX" (where XXX is the lasers
3 digit serial number) with the networks DNS server. The controller can be accessed from a network computer on
the same LAN using any standard web browser (Chrome, Firefox, etc.)
1. Connect an Ethernet cable from the Ethernet port of your computer to the ETH port of the Tiberius
controller. On the network computer, load a web browser and type the address TiberiusXXX:7190
(where XXX is the lasers 3 digit serial number) into its web address field and press [Enter].
Your browser should then display the login page of the Tiberius controller as shown below:
Username: admin Password: admin
Chapter 5: Setup and Operation
Page 19