THORLABS TIBERIUS User Manual page 18

®
Tiberius Tunable Femtosecond Ti:Sapphire Laser
5. The computer's Ethernet adapter must be set to a unique static IP address in the same address
domain as the Tiberius Controller's address of 172.16.1.1, and with a subnet mask set to
255.255.0.0.
6. In the adapters IPv4 properties screen shown on the above, choose "Use the following IP address:",
then enter IP address 172.16.1.2 into the IP address field as shown. Also enter 255.255.0.0 in the
Subnet mask field and leave the Default Gateway and DNS settings alone, as they are not used when
making a direct to device Ethernet connection. Click the [OK] button to save your changes.
Page 16
Chapter 5: Setup and Operation
TTN034204-D02