Xerox WorkCentre M20 Service Manual page 124

4. Open the MEA unit - cover open, Figure 3.
Figure 3 MEA unit - cover open
5. Remove the front cover, Figure 4.
Figure 4 Front cover removal
Repairs and Adjustments
REP 5.1
6.
1
Open the MEA unit - cover
open.
1
Release the PMO stopper
exit.
7.
1
Remove 1 screw.
2
Unclip the front cover, then
remove the front cover.
1
Disconnect CN3.
December 2006
4-26
Remove the rear cover, Figure 5.
Figure 5 Rear cover removal
Remove the MEA unit - TX stacker, Figure 6.
Figure 6 MEA unit - TX stacker removal
WorkCentre M20, 4118, FaxCentre 2218 Family
2
Remove 2 screws,
then the rear cover.
2
Remove the MEA unit - TX
stacker. Ensure the harness is
released through the hole in the
frame.