Xerox WorkCentre M20 Service Manual page 73

OF1 Function Impossible RAP
The selected mode is not supported in the current machine configuration.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. If copying, select a different copying mode.
2. If this fault occurs during Scan to Email, refer to Wiring Diagram 2 and Wiring Diagram 4.
Check the following:
• QWERTY connector. If necessary, install a new PBA SUB - OPE joint, PL 2.11 Item
9
• In-line memory module. If necessary, install a new SDRAM - DIMM, PL 1.10 Item 6.
WorkCentre M20, 4118, FaxCentre 2218 Family
OF2 IP Conflict RAP
The machine has detected a problem connected with IP addresses.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
This message is for information only.
December 2006
2-27
WARNING
Status Indicator RAPs
OF1, OF2