ACME ORION XP-260 BEAM User Manual page 15

Manual Test
To select Manual Test, press the ENTER button to confirm, the present channel will show on the
display, use the UP/DOWN button to select channel, press the ENTER button to confirm, then use
the UP/DOWN button to adjust the value, press the ENTER button to store, the fixture will run as
the channel value indicates. Press the MENU button back to the last menu or exit menu mode
idling one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
To select Fixture Information, press the ENTER button to confirm, use the UP/DOWN button to select
Fixture Hour Use, Lamp Use Time, Lamp Time Reset, Temperature, USB Updrade File, Fan State or
Firmware Version.
Fixture Hour Use
To select Fixture Hour Use, press the ENTER button to confirm, fixture use hour will show on the
display, press the MENU button to exit.
Lamp Use Time
To select Lamp Use Time , press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select Full Power Hour or Half Power Hour, press the ENTER
button to confirm. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Lamp Time Reset
To select Lamp Time Reset, press the ENTER button to confirm, fixture reset time will show on the
display, press the MENU button to exit.
Temperature
To select Temperature, press the ENTER button to confirm, fixture temperature will show on the
display, press the MENU button to exit.
14C