ACME ORION XP-260 BEAM User Manual page 16

USB Upgrade File
To select USB Upgrade File, press the ENTER button to confirm, USB upgrade file will show on the
display, press the MENU button to exit.
Fan State
To select Fan State, press the ENTER button to confirm, fan state will show on the display, press
the MENU button to exit.
Firmware Version
To select Firmware Version, press the ENTER button to confirm, firmware version will show on the
display, press the MENU button back to exit.
Reset Functions
To select Reset Functions, press the ENTER button to confirm, use the UP/DOWN button to select Pan
& Tilt Reset, Effect Reset or All Reset.
Pan & Tilt Reset—Reset Pan/Tilt
To select Pan & Tilt Reset, press the ENTER button to confirm, use the UP/DOWN button to select
No(normal) or Yes (the unit will run built-in program to reset pan and tilt to their home positions),
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Effect Reset—Reset Effect
To select Effect Reset, press the ENTER button to confirm, use the UP/DOWN button to select No
or Yes(the unit will run built-in program to reset effect to their home positions), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
All Reset— Reset All
To select All Reset, press the ENTER button to confirm, use the UP/DOWN button to select No or
Yes(the unit will run built-in program to reset all motors to their home positions), press ENTER
button to store. Press the MENU button to exit.
15C