ACME ORION XP-260 BEAM User Manual page 14

Display Settings
To select Display Settings, press the ENTER button to confirm, use the UP/DOWN button to select
Display Invert, Backlight Intensity or Temperature Unit.
Display Invert
To select Display Invert, press the ENTER button to confirm, present mode will blink on the display,
use the UP/DOWN button to select No(normal display) or Yes(invert display), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Backlight Intensity
To select Backlight Intensity, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to adjust backlight intensity from 001(dark) to 010(bright),
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Temperature Unit
To select Temperature Unit, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select ℃ or ℉, press the ENTER button to store. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Fixture Test
To select Fixture Test, press the ENTER button to confirm, use the UP/DOWN button to select Auto
Test or Manual Test.
Auto Test
To select Auto Test, press the ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, P/T speed, color, gobo, prism, prism2, rprism, shutter, dimmer, focus,
frost and spe. func. Press the MENU button back to the last menu or exit menu mode after auto
test.
13C