Mercedes-Benz Sprinter Operating Instructions Manual page 162

160 Driving and parking
Top view, without rear sensors
1
Yellow path marking the course the tires will
take at the current steering position (dynamic)
2
Yellow guide line, vehicle width (driven sur-
face) depending on the current steering angle
(dynamic)
3
Red guide line at a distance of approximately
1.0 ft (0.3 m) from the rear area
4
Red guide lines at a distance of approximately
8 in (0.2 m) from the rear area, vehicle width
including outside mirrors
When Parking Assist PARKTRONIC is operational
and no object is detected, the segments of the
warning display are shown in gray.
%
If the entire system fails, the segments of the
warning display are shown in red.
If the system fails at the rear, the segment dis-
play changes in the following ways:
The rear segments are shown in red when
R
backing up
The rear segments are hidden when driv-
R
ing forwards
If Parking Assist PARKTRONIC is deactivated,
the warning display fades out.
Guide lines
%
The guide lines in the multimedia system dis-
play show the distances to your vehicle. The
distances only apply to road level.
In trailer mode, the guide lines are shown at
the level of the trailer hitch.
View of trailer (if trailer hitch is installed)
View of trailer (if trailer hitch is installed), with
rear sensors
1
Yellow guide line, locating aid
2
Red guide line at a distance of approximately
1.0 ft (0.3 m) to the ball head of the trailer
hitch
3
Ball head of the trailer hitch
Side view of the outside mirror cameras
The sides of the vehicle can be seen in this view.
Side view, with rear sensors
1
Path indicating the route the vehicle will take
with the steering wheel in its current position
2
Yellow warning display of Parking Assist
PARKTRONIC: obstacles at a distance of
approximately 3.3 ft (1.0 m) or less
3
Your vehicle from above
4
Marker of the wheel contact points
5
Guide line of external vehicle dimensions with
outside mirrors folded out
If the distance to the object lessens, the color of
warning display 2 changes.
System failure
If there is no operational readiness, the following
display appears in the multimedia system: