Mercedes-Benz Sprinter Operating Instructions Manual page 94

Light and vision
92
2
Backing up light: P 21 W
3
License plate lamp: W 5 W
4
Rear fog light: P 21 W
You can replace the following bulbs.
Vehicles with partial LED tail lamps
1
Backing up light: P 21 W
2
License plate lamp: W 5 W
3
Rear fog light: P 21 W
▌Changing the tail lamps (Cargo Van and
Passenger Van)
Requirements:
Brake lights/tail lights/perimeter lights: bulb
R
type P 21 W
Backing up lights: bulb type P 21 W
R
Rear fog lights: bulb type P 21 W
R
1
Brake light/tail light/perimeter light
2
Backing up light
3
Rear fog light
Switch off the lighting system.
#
Open the rear-end door.
#
To remove: loosen screws
#
tail lamp in the direction of the arrow.
Remove the plug from bulb mount 3.
#
2
Loosen screws and remove bulb mount
#
from the tail lamp.
Gently turn the bulb counter-clockwise and
#
take it out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
To install: set bulb mount
#
and screw in screws 2.
Press the plug into bulb mount 3.
#
Insert the tail lamp and screw in screws 1.
#
1 and pull out the
3
3 on the tail lamp