Overview Of The Buttons On The Steering Wheel; Operating The On-Board Computer - Mercedes-Benz Sprinter Operating Instructions Manual

174 Instrument cluster and on-board computer

Overview of the buttons on the steering wheel

Variant 1
1
% Back button, left (on-board computer)
2
Touch Control, left (on-board computer)
3
Button group for cruise control or Active Dis-
tance Assist DISTRONIC
4
Button group:
£ Voice-operated control
f Displays favorites (multimedia system)
VOL: using the 8 control, increases/
reduces the volume or switches off the sound
6 Makes/accepts a call
~ Rejects/ends a call
5
ò Main menu button (multimedia system)
6
Touch Control, right (multimedia system)
7
% Back button, right (multimedia system)
Variant 2
1
% Back button, left (on-board computer)
2
Touch Control, left (on-board computer)
3
Main menu button (on-board computer)
4
Button group for cruise control or Active Dis-
tance Assist DISTRONIC
5
Button group:
£ Voice-operated control
f Displays favorites (multimedia system)
VOL: using the 8 control, increases/
reduces the volume or switches off the sound
6 Makes/accepts a call
~ Rejects/ends a call
6
ò Main menu button (multimedia system)
7
Touch Control, right (multimedia system)
8
% Back button, right (multimedia system)

Operating the on-board computer

& WARNING Risk of distraction from infor-
mation systems and communications
equipment
If you operate information systems and com-
munication devices integrated in the vehicle
when driving, you could be distracted from the
traffic situation. This could also cause you to
lose control of the vehicle.
Only operate this equipment when the
#
traffic situation permits.
If you cannot be sure of this, stop the
#
vehicle whilst paying attention to road
and traffic conditions and operate the
equipment with the vehicle stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating the on-board computer.
Operating the on-board computer (vehicles with
steering wheel buttons)
%
The displays of the on-board computer appear
on the instrument cluster display
( / page 175).
When the function is switched on, different signal
tones will provide feedback while the on-board
computer is being operated. These include a signal
tone when the end of a list is reached or when a
list is being scrolled through.
Variant 1