Sinclair S therm Series Service Manual page 98

No.
1 Environmental temperature
2 Suction temperature
3 Discharge temperature
4 Defrosting temperature
5 Entering water temperature of the plate type heat exchanger
6 Leaving water temperature of the plate type heat exchanger
7 Leaving water temperature of the auxiliary heater
8 Water tank temperature
9 Floor debug target temperature
10 Floor debug runtime
11 Liquid line temperature
12 Vapor line temperature
13 Economizer inlet temperature
14 Economizer outlet temperature
15 Remote room temperature
16 Discharge pressure
17 Weather-dependent target temperature
3.2.5.3 Error Viewing
[Operation Instructions]
At the "VIEW" page, by touching "Error", it is able to view errors of the unit, as shown in the figure below.
[Notes]
●The control panel can display real-time errors. And at these pages, all errors will be listed here.
●Each page displays at most 5 pieces of errors. Others can be viewed by touching the page turning keys.
No
1 Ambient temperature sensor error
2 Defrosting temperature sensor error
3 Discharge temperature sensor error
4 Suction temperature sensor error
5 Economizer inlet temperature sensor
6 Economizer outlet temperature sensor
7 Fan error
8 High pressure protection
9 Low pressure protection
10 High discharge protection
State Parameters
Full Name
Error View Page
Error List
Full Name
Displayed Name
T-outdoor
T-suction
T-discharge
T-defrost
T-water in PE
T-water out PE
T-optional water Sen.
T-tank ctrl.
T-floor debug
Debug time
T-liquid pipe
T-gas pipe
T-economizer in
T-economizer out
T-remote room
Dis. pressure
T-weather depend
94
Remarks
/
/
/
/
/
/
/
/
/
/
/
/
/
/
"NA" for mini chillers
/
/
Displayed Name
Ambient sensor
Defrost sensor
Discharge sensor
Suction sensor
Econ. in sens.
Econ. out sens.
Outdoor fan
High pressure
Low pressure
Hi-discharge