Sinclair S therm Series Service Manual page 74

Icon
[Notes]
●The "Cooling" mode is unavailable to the heating only unit.
●The "Hot water" mode is unavailable to the heating only unit.
●The "Heating + Hot water" ("Hot water" takes the priority) is unavailable to the mini chiller.
●The "Hot water + Heating" ("Heating" takes the priority) is unavailable to the mini chiller.
●The "Cooling + Hot water" ("Hot water" takes the priority) is unavailable to the mini chiller.
●The "Hot water + Cooling" ("Cooling" takes the priority) is unavailable to the mini chiller.
●The "Sanitation" function is unavailable to the mini chiller.
3.1.3 Backlight
Among the general setting page, when "Back light" is set to "Energy save", the display panel will light off when
there is no operation in 5 minutes. However, it will light on again by touching any valid area.
When "Back light" is set to "Lighted", the display panel will be kept lighting on.
It is suggested to set it to "Energy save" so as to extend its service life.
Description
Heating
Cooling
Hot water
Heating + Hot water
Hot water + Heating
Cooling + Hot water
Hot water + Cooling
Quiet
Sanitation
Emergency
Error Icon
Icon
70
Description
Floor commissioning
Floor commissioning error
Card out
Defrosting
Holiday
WiFi
Back
Menu page
Save
Error