Wiring Of The Gate-Controller - Sinclair S therm Series Service Manual

Step 2. Electric wiring work
Other thermal L and N connect to XT2~4,5.
(1) GSH-40TRB+GSH-40ERB,GSH-60TRB+GSH-60ERB, GSH-80TRB+GSH-80ERB, GSH-100TRB+GSH-100ERB
(2) GSH-40TRB2+GSH-40ERB2, GSH-60TRB2+GSH-60ERB2, GSH-80TRB2+GSH-80ERB2, GSH-100TRB2+GSH-100ERB2
GSH-120TRB2+GSH-120ERB, GSH-140TRB2+GSH-140ERB, GSH-160TRB2+GSH-160ERB, GSH-80TRB2-3+GSH-80ERB-3
GSH-100TRB2-3+GSH-100ERB-3, GSH-120TRB2-3+GSH-120ERB-3, GSH-140TRB2-3+GSH-140ERB-3,
GSH-160TRB2-3+GSH-160ERB-3
Other thermal L and N connect to XT3~1,2
Step 3. Wired controller setting
Other thermal should be selected "with" if necessarily from COMMISION → FUNCTION, then set switch on
(outdoor)temperature and control logic(1/2/3).

4.12 Wiring of the Gate-Controller

If there is gate control function, installation guide follow as:
(1) GSH-40TRB+GSH-40ERB,GSH-60TRB+GSH-60ERB, GSH-80TRB+GSH-80ERB, GSH-100TRB+GSH-100ERB
XT2
5
4
Other
Thermal
AP1
T-optional
AP1
XT3
Other
thermal
XT3
134
sensor
T-optional
sensor
(accessory)