Sinclair S therm Series Service Manual page 101

No Item
3 Beeper
4 Back light
5 Time&Data
6 Language
7 WiFi
3.2.6.1 Clock Setting
[Operation Instructions]
1.At the "GENERAL" setting page, by touching "Time&Data", it will go to the setting page as shown in the figure
below.
2.The mouse roller can change the date and time value. After it, by touching the "Save" icon, this setting will be
saved and directly displayed; while by touching the "Back" icon, this setting will give up and the control panel will
directly go back to the "GENERAL" setting page.
Range
Enter
Lighted/Energy save
Enter
Italiano/English/Español/
Nederlands/Français/
Deutsch/Български/Polski/
Türkçe/Magyar/Lietuvių/
Hrvatski/Čeština
On/Off
Time&Data Page
Time&Data Page
Default
On
"Lighted": the control panel will always
light on.
"Energy save": When there is no touching
Energy save operation in 5 minutes, the control panel
will be lighted off automatically, but will
be lighted on again once there is any
touching operation.
/
English
On
97
Remarks
/
/
/
/