Table of Contents
Advertisement
Mount a TV with a Recessed Mounting Surface
To accommodate different TV designs, the FHA-TV-WALL-
MOUNT includes five sets of screws of various lengths and
diameters, two sizes of washers, and two sizes of spacers.
Bridge the gap between the VESA Plate or VESA Extension
1.
Plates and the VESA Mounting Holes, located on the back
of the TV. Select appropriately sized M-Type Screws (x 4) and
pair them with an adequate combination of Spacers. Refer to
the bullets and Figures 5 and 6.
Determine the Depth of the mounting holes on the TV.
•
Determine the Diameter of the mounting holes on the TV.
•
Refer to the images below to see the possible hardware
•
combinations of Screws and Spacers.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
M6 x 30
Combined
with Spacers
or
Figure 5
M8 x 30
or
or
10
10
Advertisement
Table of Contents
