Table of Contents
Advertisement
Align the VESA Plate or the VESA Extension Plates with the
2.
mounting holes on the back of the TV.
Place the Display Washers, Large over the VESA Plate or
3.
the VESA Plate Extensions.
Insert the M6 x 30 Screws (x 4), M8 x 30 Screws (x4), or
4.
M8 x 50 Screws (x 4) through the Washers, Large the VESA
Plate or VESA Extension Plates, the Spacers, and into
the VESA Mounting Holes, located in the back of the TV.
(Figure 7)
Tighten the appropriately sized M-Type Screws, using a Phillips
5.
Head Screwdriver
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
M8 x 50
Combined
with Spacers
or
.
11
or
Figure 6
Advertisement
Table of Contents
