Table of Contents
Advertisement
Attach a TV to the Arm Assembly
Warning! Ensure that the weight of the TV does not exceed
the weight capacity of this product. Exceeding the weight
capacity may result in personal injury and/or damage to
the product, the attached equipment, and/or the mounting
surface. This product can support the following weight: Up to
66 lbs (30 kg).
Attaching the TV is a two-person Job. Do not attempt to
complete this task by yourself.
Continue to support the weight of the TV until the nuts (x 4)
have been installed and adequately tightened.
Locate the Top Threaded Studs at the back of the VESA
1.
Plate.
Slide the partially loosened Top Nuts, located on the back of
2.
the VESA Plate Assembly, down into the Slots, located on
the end of the Arm Assembly. (Figure 8)
Insert the Two Nuts, from Step 1 of Installation - Release
3.
the VESA Plate from the Arm Assembly, located on the
back of the VESA Plate Assembly.
Use the provided Wrench to tighten all the Nuts (x 4).
4.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
13
13
Figure 8
Advertisement
Table of Contents
