Table of Contents
Advertisement
need to use any of the provided spacers.
Align the VESA Plate or the VESA Extension Plates with
2.
the mounting holes on the back of the TV.
Place the appropriately sized Display Washers (x 4) over the
3.
VESA Plate or the VESA Extension Plates.
Insert the appropriately sized M-Type Screws (x 4) through
4.
the Display Washers, the VESA Plate or VESA Extension
Plates, and into the VESA Mounting Holes, located in the
back of the TV. (Figure 4)
Tighten the appropriately sized M-Type Screws, using a Phillips
5.
Head Screwdriver
Warning! Do not overtighten the screws. If you encounter
resistance while tightening the screws, stop tightening.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
.
Figure 4
9
M5 x 14 Screw
M6 x 14 Screw
Washer
Advertisement
Table of Contents
