Installation
Remove the VESA Plate from the Arm Assembly
Partially loosen the Top Nuts, located on the back of the
1.
VESA Plate, using the Wrench. The Top Nuts indicate the
Up position of the VESA Plate.
Remove the Bottom Nuts, located on the back of the
2.
VESA Plate, using the Wrench. Set aside the Bottom
Nuts as they will be used in a later step.
Slide out the bottom and lift upwards to remove the VESA
3.
Plate from the Arm Assembly. (Figure 1)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 1
6