Table of Contents
Advertisement
Cable management
Route the TV Cables through the Cable Management
1.
Attachments, located under the Arm Assembly, and to the
Power/AV Sources. (Figure 10)
Adjust the Tilt Tension
Locate the adjustment Bolts, on the back of the VESA Plate.
1.
(Figure 11)
Use the provided 4 mm Hex Key. Rotate Clockwise to
2.
Increase the Tension, and rotate Counterclockwise to
Decrease the Tension.
To set the TV at a fixed angle, tilt the TV to the desired angle
and fully tighten the Tilt Tension Adjustment Screws, using
the 4 mm Hex Key.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
15
15
Figure 10
Figure 11
Advertisement
Table of Contents
