Table of Contents
Advertisement
Mounting the Wall Mount
Fasten the Wall Mount to a Wood Stud or Concrete Wall
Warning! The TV wall mount is designed to be installed on
a wood stud, solid concrete, or cinder block wall. The wall
structure should be capable of supporting at least four times
the weight of the mounted equipment.
The mounting hardware included with this product may not
be adequate for installation on certain wall structures.
Contact a construction professional to install the wall
mount. Failure to do so may result in personal injury and/or
equipment damage.
Install the Decorative Covers
Gently Push-in the Decorative Covers onto the Wall
1.
Mount. (Figure 2)
Configure the VESA Plate to the TV Mounting Pattern
If the two mounting holes on the VESA Plate are not
compatible with the mounting holes on the TV or display, use
the VESA Extension Plates to create a compatible mounting
hole configuration.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 2
7
Advertisement
Table of Contents
