2. Cabin Roof Front
Now place the front roof (35) with ist cut out
corners between the two side walls and glue
only at the cut outs.
Fix the roof at its cut outs with superglue
When the glue is dry, bend the side according
to the curve of the roof and fix with superglue.
Stand Februar 2016
35
Seite 7
When the glue is dry, do the same on the other
side. After that glue from inside and fix with
clamps.
Now fit the front part (37) to the superstructure.
The upper edge needs to be sanded angular to
fit correctly.
Now sand the flush the overlaying ends.
©
Krick Modelltechnik Knittlingen
37
sand
angular