Krick 20320 Building Instructions page 23

Building Instructions Lisa M.
Congratulations for buying this model kit of the
motor yacht „Lisa M.". This model is mainly
designed for the beginner, but is also a very
interesting kit for more experienced modellers
as a basis for own ideas.
For building this model you should have follow-
ing glues, fillers and paints:
- Superglue Krick ruck-zuck 20g thin (80491)
- Superglue Krick ruck-zuck 20g medium
(80495)
- 5min-Epoxy glue 100g (80479)
- wood glue UHU Holz waterresistant 75g
(48515)
- 2-component glue UHU-Plus acrylit 30g
(48315)
- Filler Micro-Fill white 295 ml (80480)
- Primer (Lord Nelson 80110)
- Clear Varnish for stairs, doors, (80112)
- paint spray blue (320053), light grey (Primer
and for deck), and white (320010)
- lacquer red, grey, silver and black for fittings
Following tools are recommended for building
"Lisa M.":
- modelling knife (416002)
- hand drill (473841)
Stand Februar 2016
Order-No. 20320
- sandpaper files (491016)
- sanding block (490080)
- sand paper of grane 180, 320, 400 and 600
(Set 490190)
- round file ca. Ø 6 mm
- drills Ø 1 mm, 1,5 mm, 2 mm, 3 mm, 4 mm,
6,5 mm
- wet sand paper 400 und 600 for filler, primer
and paints
When painting you should have masking tape
for areas, which should not be painted. A 3 mm
wide tape should be used for the water line.
For running and radio control you should have
following parts:
- 2 channel radio control including one Servo
- electronic speed control 20 A, forward/back
including BEC
- battery pack 7,2V NiCd, NiMH or lead battery
6V/1,1 Ah
- charger 220V AC or 12V DC
Many pictures in the following instruction
should make the building of the model as easy
as possible.
For identifying the laser cut parts in the
wooden sheets, there is a drawing at the end
Seite 1 ©
Krick Modelltechnik Knittlingen