Krick 20320 Building Instructions page 28

Make the rudder from parts 96 a – 96 d. First
glue parts 96 c and 96 b to each other.
Then glue these inner parts onto one outer
side (96 d) that a gap remains for the rudder
shaft.
Roughen well the rudder shaft on the area,
which will be glued into the rudder.
Now glue in the rudder shaft with Uhu Acrylit
and the second outer plate (96 d) on top.
Stand Februar 2016
Now make a profile on the rudder, sharp at the
end and round at the front.
II SUPERSTRUCTURE
1. Cabin
For the first step of building the superstructure
you will need parts 32, 33, 34 und 40.
Now draw the outline of the windows to the
glazing material of PVC (100) and give some
more millimetres for gluing behind the win-
dows.
40
Try fit the parts first without glue. If necessary
sand the slots or tenons for a perfect fit. Now
first glue the side walls to the frame and back
wall. When the gluing points are dry you can
glue the bar (40) in place.
Seite 6
32
34
33
32
©
Krick Modelltechnik Knittlingen