Wlan Parameters; Codec List - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
MMC: 845
DESCRIPTION:
This program provides detail parameters for WLAN settings.
<WLAN Parameter>
No. Parameter
01

CODEC LIST

02 RF CHANNEL
03 VERSION
04 MAX AP CH
05 WLAN
SWITCH
According to the AP type, CWBS is displayed if WBS24 is set to Combo, and BWBS
if set to Basic on the LCD display. The AP type can be set in [AP TYPE] of [MMC
849].
<SIP Parameter>
Normally, use the default without change.
No. Parameter
1 GEN NO RESP
2 INV NO RESP
3 REQ RETRY
4 PROVISIONAL
5 RE-TRANS T1
6 RE-TRANS T2
7 RE-TRANS T4
CODEC used in a wireless VoIP call
Currently it set to G.729
RF Channels used in the system must match with APs.
Indicates the WLAN module version
Maximum channel per AP
Enable or disable the use of WLAN switch
Waiting time before canceling the SIP Request.
Waiting time before canceling the SIP INVITE Request.
Waiting time before the final response to the SIP Request is received.
When receiving the Provision Response, User Agent should wait
during this time before Timeout expires.
When using Unreliable transmission protocol such as UDP,
retransmission is performed if there is no response after transmission.
RE-TRANS.T1 TIME is the Initial Retransmission Interval defined in
RFC2543.
Maximum Retransmission Interval defined in RFC 2543.
Available for multiple purposes in RFC 2543. This parameter is used
as time when User Agent Server(UAS) receives the ACK message
and waits in the Unreliable transmission protocol.

WLAN PARAMETERS

Description
Description
PROGRAMMING
PART 2 APRIL 2007