Samsung OfficeServ 7100 Technical Manual page 17

OfficeServ 7100
TECHNICAL MANUAL
MMC: 800
DESCRIPTION:
Used to open and close technician-level programming. If programming is not
opened and an attempt is made to access a system MMC, the error message
ACCESS DENIED will be displayed.
A four digit passcode is required to access this MMC. Each character can be digits
0-9. When opened, this MMC enables access to all MMCs.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 800.
Display shows.
2. Enter passcode.
Correct code shows.
Incorrect code shows.
3. Enter 1 to enable or 0 to disable
OR
Press UP or DOWN to select.
Press RIGHT soft key to move to tenant
number and enter tenant number (1-2).
4. Press SPEAKER to advance to MMC entry
level.
ENABLE TECHNICIAN PROGRAM
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PART 2 APRIL 2007
DISPLAY
ENABLE TECH.PROG
PASSCODE:
ENABLE TECH.PROG
PASSCODE: ∗∗∗∗
ENABLE TECH.PROG
DISABLE TENANT : 1
ENABLE TECH. PROG
PASSCODE ERROR
ENABLE TECH.PROG
ENABLE TENANT : 1
801:TEC.PASSCODE
SELECT PROG.ID
PROGRAMMING