Samsung OfficeServ 7100 Technical Manual page 69

OfficeServ 7100
TECHNICAL MANUAL
9. Using the keypad enter the digits to insert.
Press RIGHT soft key to enter data and move
cursor.
10. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
11. Using the keypad enter two digit IP table to
translate dialed numbers to IP address.
13. Press RIGHT soft key to move cursor. Using
the keypad enter two digit IP translation start
location to search for an IP address
OR
14. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA:
RELATED ITEMS:
MMC: 832
ACCESS DGT: 00~09 (digits 0~9) ,10~62 NONE
DGT LENGTH: 1 (digits 0~9), 10~62 NONE
DEL.LENGTH: 0
INSERT DGT: NONE
IP TABLE 1: 00
IP START: NONE
GK USE: NO
MMC 615: MGI GROUP
MMC 616: MGI USER
MMC 830: ETHERNET PARAMETERS
MMC 831: MGI PARAMETERS
MMC 833: VOIP ADDRESS TABLE
MMC 834: H.323 OPTIONS
MMC 835: MGI DSP OPTIONS
MMC 836: H.323 GATEKEEPER OPTIONS
MMC 837: SIP OPTIONS
MMC 838: PRIVATE IP ADDRESSES
MMC 840: IP SET INFO
MMC 841: SYSTEM IP OPTIONS
MMC 714: DID TRANSLATIONS
MMC 321: CLIP TABLE
PROGRAMMING
PART 2 APRIL 2007
[0:00] INSERT DGT
9
[0:00] IP TABLE 1
00
[0:00] IP TABLE 1
01
[0:00] IP START
00