Samsung OfficeServ 7100 Technical Manual page 64

OfficeServ 7100
TECHNICAL MANUAL
• Public IP Only – use when MGI's IP address is exposed to the public
network.
• PUBLIC IP: The MGI will originate communications, to ITP/VOIP devices outside
the local network, using this IP address. The system identifies communications
to/from this
networks/subnets, to establish communications with the system, without
exposing your LAN.
• PUBLIC PORT: This defines the UDP port range on the firewall forwarded to the
MGI resources.
• CARD RESET: Use this option to reset the MGI. This option only applies to MGI
cards installed on the system. It does not apply to the on-board MGI ports.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 831.
Display shows the first trunk on selected MGI
card.
2. Press RIGHT soft key to move cursor.
3. Press RIGHT soft key to move cursor to IP
address line.
4. Using the keypad enter three digit IP octet
numbers IE 192 168 001 050 for 192.168.1.50
5. Cursor will return to Step 2 upon completion
of IP address entry.
6. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
MMC: 831
address as "public".
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
This allows devices,
DISPLAY
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
168.219. 76.101
[3801] IP ADDRESS
105.052.010.050
[3801] IP ADDRESS
105. 52. 10. 50
[3801] GATEWAY
168.219. 76.
PROGRAMMING
PART 2 APRIL 2007
on remote
1