Samsung OfficeServ 7100 Technical Manual page 113

OfficeServ 7100
TECHNICAL MANUAL
ALM ALM
NO. CODE
50 MJD19
51 MJD20
52 MJD21
53 MJD22
54 MJE01
55 MJE02
56 MJE03
57 MJE04
58 MJE05
59 MJE06
60 MJE07
MJE10
MJE11
MJE12
MNF32
MNF33
61 MNF01
62 MNF02
63 MNF03
MMC: 852
ALARM
PRI Restart
BRI Restart
PCM Loss
PCM Recovery
MGI Restart
MGI Stop
MGI IP Duplicate
MGI Ntwk Error
MGI Ntwk Rec.
MGI DSP Error
MGI DSP Run
SVM Card Restart
SVM Card Halt
SVM Card Down
SVM Card Ready
SVM Card Request
Card Out
Card In
IPC Error
PART 2 APRIL 2007
DEFINITION
The PRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
The BRI card has restarted
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Loss of PCM coding on a digital facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
Recovery of PCM coding on a digital
facility.
Alarm Data = Cabinet, Slot (C1,2) (S1
through 10)
An MGI card has restarted.
An MGI card has stopped.
MGI IP address conflict.
MGI Recovery.
Card Restarted
Card Halted
Card When Down
Alarm Code when voicemail is ready.
Alarm Code when voicemail request the
number to MCP after restarting.
A circuit card mounted in a universal slot
has been removed from service or is not
recognized by the Common Control
Processor
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
A circuit card mounted in a universal slot
has been returned to service.
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
Inter processor communication error
has occurred.
Alarm Data = Cabinet-Slot (C1,2)-(S 1
through 10)
PROGRAMMING