Samsung OfficeServ 7100 Technical Manual page 101

OfficeServ 7100
TECHNICAL MANUAL
MMC: 846
DESCRIPTION:
[MMC846] is used to display the handset information and set some parameters.
You can change USER ID, PASSWORD, and INSERT DGT.
No. Parameter
0 REGISTERED
1 LOCATED
2 PHONE TYPE
5 IP OFFSET
6 IP ADDRESS
7 MAC ADDR
8 USER ID
9 PASSWORD
10 INSERT DGT
ACTION
1. Select the MMC number [846].
2. Select a desired handset number.
Or select a desired handset number
using the [▼Volume▲] button, and press
[RIGHT] soft button to move the cursor.
3. Enter a desired item number.
Or select a desired item using the
[▼Volume▲] button, and press [RIGHT]
soft button to move the cursor.
Indicates whether the corresponding handset is registered
Indicates whether the corresponding handset is currently connected to
the system
Indicates the type of the handset
Location of the IP pool where the IP assigned to handset is located
IP address assigned to the registered handset
MAC address of the registered handset
Sets ID by the handset user
Sets password by the handset user
If the number of digits you pressed when originating a call in handset is
more than 5, the set INSERT DGT is inserted before the number you
pressed.
However, the number you pressed should not be C.O. Line number, C.O.
Line group number, LCR, network LCR, or number starting with the
function code
WIP INFO
Description
DISPLAY
[3301] REGISTERED
NO
[3301] REGISTERED
NO
[3301] LOCATED
DETACH
PROGRAMMING
PART 2 APRIL 2007