Samsung OfficeServ 7100 Technical Manual page 31

OfficeServ 7100
TECHNICAL MANUAL
MMC: 810
DESCRIPTION:
Used only in the event that all data processing needs to be stopped either in a
single cabinet, slot or in the entire system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ANS/RLS
ACTION
1. Press TRANSFER 810.
Display shows.
Enter cabinet selection via dial keypad
2.
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance cursor.
Press ANS/RLS to select all cabinets
and slots.
3. Enter slot number via dial keypad
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to advance cursor.
4. Enter 1 for HALT or 0 to PROC
OR
Press UP or DOWN key to make selection.
Press RIGHT soft key to enter and return to
step 2.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
HALT PROCESSING
DISPLAY
HALT/PROCESSING
C:ALL S:ALL→ PROC
HALT/PROCESSING
C:1 S:ALL→ PROC
HALT/PROCESSING
S:ALL →PROC
C:ALL
HALT/PROCESSING
S:ALL →HALT
C:ALL
PROGRAMMING
PART 2 APRIL 2007