Samsung OfficeServ 7100 Technical Manual page 37

OfficeServ 7100
TECHNICAL MANUAL
MMC: 816
DESCRIPTION:
Provides a tool to adjust the gain or loss of stations and trunks in the conference
bridge. This is made available to allow for the adjustment of the conference bridge
due to permanant unsatisfactory C.O. conditions that may inhibit a satisfactory
conference bridge. Programming adjusments can be made on individual
conference analog trunk members.
Caution!! This MMC is not to correct low volume. To be used with the support of STA
Technical Support Department.
IDENTIFICATION
MEMBER:
A-TRK:
CNF:
SW:
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Press TRANSFER 816.
Display shows.
2. Press UP or DOWN key to make selection.
Press RIGHT soft key to make change and
to move cursor.
3. Press UP or DOWN key to make selection
OR use the DIAL pad to make a selection.
4. Press UP or DOWN key to make selection eg.
4 part conference bridge. Press RIGHT soft
key to move cursor.
This identifies which size of conference the adjustment will be
made for. ie. 3,4 or 5 party conference.
This identifies which analog trunk member that is being addressed.
This is the gain or loss adjustment in the conference bridge.
This is the gain or loss adjustment in the time division switch.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
CONFERENCE GAIN
DISPLAY
CONFERENCE GAIN
USE DEFAULT :YES
CONFERENCE GAIN
USE DEFAULT :NO
MEMBER:3
CNF:-2.5
MEMBER:4 A-TRK:0
CNF:-2.5
PROGRAMMING
PART 2 APRIL 2007
A-TRK:0
SW:+0.0
SW:+0.0