Default Applications - Samsung OfficeServ 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
Character(s) Function
~di
H
In addition to these standard dialing strings the system can also dial out of any System
Register. The following chart shows what string to use to dial which Register value.
Characters
$K
$X
$C
$F
$T
$B
$E
$N
$S
$A
$1
$2
$3
$4

8.1.7 Default Applications

8.1.7.1 Voicemail Messaging
All Extension blocks use a default EClass block, which has been preconfigured to allow
callers to leave a message in the Extension's associated Mailbox by making no entry or
by pressing 1.
8.1.7.2 Automated Attendant Greeting
The Schedule Table defaults to follow the ring plan schedule in MMC 507. Default
Mode blocks have been created that will route calls to the appropriate Menu block
according to the operating mode currently in use. Day, Night, Holiday, and Weather
menus have been created that will greet the caller with a generic greeting prompt and
allows multiple commonly used options.
8.1.7.3 Operator Access
All Menu, Extension, and Mailbox blocks are preconfigured such that a caller who
presses zero is transferred to the system operator group.
This string tells the system to use in-band dialing (primarily for pager
usage)
Capital H tells the system to operate the hook switch. If on-hook, it will go
off-hook. If off-hook it will go on-hook.
Function
This will dial the value stored in the Key register
This will dial the value stored in the Extension Number register
This will dial the value stored in the Caller ID register
This will dial the value stored in the Forward ID register
This will dial the value stored in the Trunk ID register
This will dial the value stored in the Callback register
This will dial the value stored in the VM/AA Port Number register
This will dial the value stored in the Number of New Messages register
This will dial the value stored in the Number of Saved Messages register
This will dial the value stored in the Long Distance Account Code register
This will dial the value stored in register 1
This will dial the value stored in register 2
This will dial the value stored in register 3
This will dial the value stored in register 4
8.1.7
PROGRAMMING
PART 8 APRIL 2007