Samsung OfficeServ 7100 Technical Manual page 116

OfficeServ 7100
TECHNICAL MANUAL
MMC: 853
DESCRIPTION:
This MMC is used to place stations, trunks, and common resources equipment in a
maintenance busy condition. This can be used to isolate suspected intermittent
problem equipment. Stations placed in maintenance busy will behave like a station
in DND when called. The calling stations display (if equipped) will show "MADE
BUSY" when called. Stations receiving DID type calls will receive a DND/ No more
calls tone. The station display will still function with station and date. When the busy
station is accessed, it will function like a locked out station. Trunks made busy can
not originate calls. Ring down type trunks will still ring the programmed destination.
MAINTENANCE BUSY OPTIONS
0. TRK
1. STN
2. PAGE
4. DTMFR:DSP = DSP # 1-8
5. CID:DSP
6. CONF:GRP
7. MGI
NOTE: Selectable conditions 0 = idle state
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
TRANSFER
ACTION
1. Press TRANSFER 853.
Display shows busy functions.
2. Press UP or DOWN to select function and
press RIGHT soft key to move cursor.
= Trunks
= Stations
= Page Ports
= CID DSP # 1-8
= CONF:GRP #1-6
= MGI # 0-8
1 = busy state
Scroll through options
Used to enter selections
Move cursor or select option
Used to advance to next MMC
Exit
MAINTENANCE BUSY
DISPLAY
MAINTENCE BUSY
TRK :NONE ->
MAINTENCE BUSY
STN :NONE ->
PROGRAMMING
PART 2 APRIL 2007