Samsung OfficeServ 7100 Technical Manual page 76

OfficeServ 7100
TECHNICAL MANUAL
• FAX ECM: This option enables or disables fax error-correction made (0: disable,
1: enable).
• MAX FAX CNT: This is maximum number of channels that can be
simultaneously utilized for Fax-over-IP. The range is 00~08. Each MGI-16 can
handle 2 simultaneously.
• DTMF TYPE: There are two types of DTMF transmission: INBAND, which is
industry standard (H.245) type DTMF transport, and OUTBAND which is a
Samsung proprietary method.
• TOS/DIFFSERV: An eight-bit binary value that will be utilized by external routers,
switches, etc (that optionally support TOS-bit/DiffServ prioritization) – to identify
the transport-priority value of data packets generated by the MGI card. This
value can be left at default value (00000000) if your network infrastructure does
not support this method of bandwidth management.
• FAX RETRY: The number of attempts to resend a failed fax transmission.
• RTP CHECK TIME: Interval between RTCP packets sent from MGI cards.
• USE T.38 711: Implements the T.38 fax over IP protocol when using G.711
codec.
• 802.1q: Enables/disables VLAN tagging on the MGI resources.
• 802.1 PRIORITY: Assigns a priority to the VLAN tag.
• 802.1 Q VLAN: Assigns a VLAN ID to the MGI.
• ECGAIN
• NLP
• EC TAIL LEN
• JIT PERIOD
• JIT DEL TM
Note: Does not apply to ITP to ITP calls (where both ITP's are in same public
zone, or both in same private zone). For ITP to ITP calls, use settings in MMC
840/MMC 841.
MMC: 835
SAMSUNG ENGINEERING USE ONLY.
DO NOT CHANGE UNLESS YOU ARE
ADVISED TO DO SO BY SAMSUNG
TECHNICAL SUPPORT.
PROGRAMMING
PART 2 APRIL 2007