Christie DHD630-GS Installation Manual page 8

Installing the ultra short throw pogo pin adapter
for LSM2
To attached the ultra short throw lens to the projector, install the pogo pin adapter for LSM2.
A Circuit board
B Side screws
C Middle screw
The middle screw (C) controls the lateral position of the circuit board (B) on the adapter:
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-07 Rev. 1 (12-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ultra short throw lens installation
8