Christie DHD630-GS Installation Manual page 19

Screen size
Diagonal W (cm)
(inches)
230 495.4
240 516.9
250 538.5
260 560.0
270 581.6
280 603.1
290 624.6
300 646.2
310 667.7
320 689.3
330 710.8
340 732.3
350 753.9
400 861.6
Turning on the projector
Before turning on the projector, ensure the ultra short throw lens has been installed.
1. Plug the projector into AC power.
2. To turn on the projector, select the Power button.
Adjusting the boresight
The boresight adjustment range changes depending on the orientation of the projector.
When adjusting the boresight with the internal test pattern, only limited lens shift can be performed
and source input is not allowed.
1. Note the location of each the boresight screw before continuing with this procedure.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-07 Rev. 1 (12-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
H (cm) P (cm) A-P
(cm)
309.6 19.9 120.4
323.1 19.9 126.1
336.5 19.9 131.7
350.0 19.9 137.4
363.5 19.9 143.0
376.9 19.9 148.7
390.4 19.9 154.4
403.9 19.9 160.0
417.3 19.9 165.7
430.8 19.9 171.3
444.2 19.9 177.0
457.7 19.9 182.6
471.2 19.9 188.3
538.5 19.9 216.5
Ultra short throw lens installation
L (cm) B (cm) C (cm)
82.6 94.2 176.8
82.6 101.5 184.1
82.6 108.8 191.5
82.6 116.2 198.8
82.6 123.5 206.1
82.6 130.8 213.4
82.6 138.1 220.8
82.6 145.5 228.1
82.6 152.8 235.4
82.6 160.1 242.7
82.6 167.4 250.0
82.6 174.7 257.4
82.6 182.1 264.7
82.6 218.7 301.3
M (cm)
275.2
287.6
300.0
312.4
324.8
337.2
349.6
361.9
374.3
386.7
399.1
411.5
423.9
485.8
19