Christie DHD630-GS Installation Manual page 20

LSM1:
LSM2:
2. To display a test pattern to assist with adjusting boresight, select TEST.
Four internal test patterns are available.
3. To switch to the next test pattern, select TEST.
4. To exit the Test pattern menu, select Exit.
To access the boresight test pattern after pressing Exit from the popup window, go to the
Service menu.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-07 Rev. 1 (12-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ultra short throw lens installation
20