630-GS and 635-GS:
c) Continue with the last step in this procedure.
10. If using the lens support bracket with Christie One Mount, complete the following steps:
a) Place the lens support bracket assembly on the bottom of the projector.
b) Position two pillars of Christie One Mount to the lens support bracket and the other two
pillars on the projector as shown below.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-07 Rev. 1 (12-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ultra short throw lens installation
13