Christie DHD630-GS Installation Manual page 11

• For the 700-GS, 850-GS, 880-GS, 1075-GS, 1100-GS, and 1400-GS models, align the
screw holes on mounting block A to the holes marked A on the lens support bracket.
• For the 630-GS and 635-GS models, align the screw holes on mounting block B to the
holes marked B on the lens support bracket.
6. Install four M3x8 screws to secure the mounting block to the lens support bracket.
700-GS, 850-GS, 880-GS, 1075-GS, 1100-GS, and 1400-GS:
630-GS and 635-GS:
7. To secure the angle bracket to the lens support bracket, install one M3x8 hex screw and one
M3 washer.
Do not fully tighten the screw.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-07 Rev. 1 (12-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ultra short throw lens installation
11